Denso Fuel Pump Installation Page
2
2G FWD Turbo ('97 Spyder)
by Mark Purney |
|
Disconnect the hoses on the top side
(19mm and 14mm flare nut wrenches). |
|
Hoses shown removed. |
|
Remove the 6 nuts from the top plate
of the fuel pump assembly. |
|
Lift up the f.p. assembly to remove
it, with a shop rag to catch dripping gasoline. |
|
Remove lower part of bracket. |
|
Disconnect pump from top bracket. |
|
Carefully pry off the O-ring cap.
Do this slowly alternating sides, and be careful not to damage
the O-ring in the process. |
|
Remove cap, O-ring, and plastic spacer. |
Proceed to page 3
|